The CGX8-250 mini Octocopter FPV frame is designed to use all of the popular flight controllers available today including the Open Pilot CC3D and Revo Boards, as well as the Naze32, Multiwii, KK2, Naza and APM flight controller which has a large footprint, but still fits comfortably in the centre of the frame.
The airframe itself features high quality genuine 3K twill weave carbon fiber milled components such as the plates, arms and Mobius mount. The motors are spaced evenly apart, measuring 250mm motor to motor, which makes tuning your flight controller a little easier, and adds an extra degree of smoothness and stability to the flight characteristics. The pillars are made from carbon filled nylon for added strength but are also light weight. Fully assembled the frame weights 130 grams with all metal bolts and vibration dampener installed.
The CGX8-250 Mini Octocopter FPV frame can use both 5 and 6 inch propellers, and up to 7 inch propellers with the new longer arms set to be available soon. Included in the kit is an anti vibration dampening plate for a Mobius action camera, with soft silicone vibration dampening balls for smooth jello free video.
View The CGX8-250 Mini Octocopter Manual & Naze32 Setup Guide
Links to Recommended 250 size Mini Octocopter Gear
Acro Naze 32 Flight Controller.
12 Amp Afro Esc’s.
RCX 1806 2400kv motors.
HQProp 5×4″ Carbon Composite Props or HQProp 6×3″ Carbon Composite Props.
Nanotech 3S 1400mAh 40/80C battery, 118.7g.
FrSky D4R II Receiver (Comes already flashed with the 27ms firmware).
Runcam Sky FPV Camera 650 TVL.
Mobius Wide Angle Action Camera.
ImmersionRc 600mW Video Tx.
ImmersionRc 5.8GHz Circular Polarized SpiroNet Antenna.
FPV antenna patch cable.
Flight Videos to Come Soon